Daewoo IC Forklifts Los Angeles

Inspect a Forklift

There are over 10,000 workplace injuries connected to forklifts occur each year, according to HRSDC and OSHA reports. A lot of these mishaps are caused by driver error. Lack of appropriate equipment maintenance and inspection causes numerous others. Operation and maintenance of a forklift is not only the reason for personal injuries, but also of property damage. Forklifts could damage building structures, overhead pipes and sprinklers, and other equipment when utilized improperly. The following daily inspections should be performed so as to reduce the possibility of forklift accidents.



Before inspecting various fluid levels turn off the engine. Check these fluids: hydraulic oil, fuel, engine oil, coolant and brake fluid. The tires also have to be inspected for indications of wear and tear. Check the air pressure in the tires. Check the condition of the forks. The load backrest must be tightly attached. Do a visual check of the top-clip retaining pin and heel. Then carry out an inspection of the hydraulic hoses, mast chains, cables and stops. Make sure that the overhead and finger guards are attached securely.



LP forklifts have propane tanks that need to be inspected for indications of corrosion, damage or rust. Test the battery's electrolyte levels and charge. All belts should be checked for wear. Check to make certain the owner's guidebook is kept on-board the forklift inside a storage compartment. Test the seat belt to make sure the latches are secure. Check the hood latch to ensure it is working as it should.



Start the forklift and listen to the noise of the engine to make sure there are no unusual sounds. If there are, investigate at once. Test the steering controls and the accelerator. The service brake and the parking break should be properly functioning.



To ensure proper functioning in both reverse and forward, the tilt control and drive control should be checked. The functioning of the lowering control, the hoist and attachment control requires periodic checking. Test the horn and lights. Afterward check the wipers, heater and defroster to make sure they are functioning smoothly. Check every gauge to find out that it is reading within functional limits.

• Caterpillar Dual Fuel Forklifts Los Angeles
  Lift Truck Training For handling materials, there are many types of industries which use powered industrial trucks. In the recycling business, internal combustion powered forklifts are popular. Lift truck operation need well trained operators. Training... More
• Fantuzzi Reach Stacker Los Angeles
  Fantuzzi's lineup of reach stackers are manufactured by Terex. These reach stackers are well engineered and very cost effective equipment that are made for strength and durability. Fantuzzi's numerous reach stackers are extremely cost effective... More
• Toyota forklifts Los Angeles
  Toyota's lift trucks are designed to feature improved ergonomics, durability, visibility which can result in more production. Toyota remains the leader in safety technology that can be more remarkable compared to the features before. Toyota... More
• Gradall Zoom Boom Los Angeles
  All Access for All Terrain The telehandlers made by Gradall enable you to easily work around any obstructions and conquer the job site. This easy stability is due to the 3 distinct steering modes that... More
• Omega Rough Terrain Forklifts Los Angeles
  MEGA Series - The MEGA Series is a powerful lift truck which is capable of covering a range of applications. From steel and lumber and handling other types of heavy lifting up to 9100 kg,... More